|
Volume shape
extracting wet-wipes machinery
|
| ¡¡ |
|
Brief introduction of products:
Shape: Volume shape with tear up line in a
certain distance.
Packing type: Plastic round barrel or square
shape pot. The wet-wipes products are the volume shape,
with the dashed line spot. 50 pieces/volume, 60
pieces/volume, 80 pieces/volume, 120 pieces/volume
and so on. We extract the wet tissue one by one from the
center of the volume.
Products in different uses: The baby wet tissue,
the hygienic clean wet tissue, the medicine wet tissue,
clean skin wet tissue, the industrial clean the wet
tissue, the computer clean wet tissue, disinfected wet
turban, the degreasing wet tissue, scratches glass wet
tissue, scratches floor wet tissue, pet clean wet tissue
and so on. |
| ¡¡ |
|
Brief introduction of the equipment:
One of the equipments:
Ordinary volume shape extracting wet-wipes machinery (2
sets) . |
| ¡¡ |
|
1£®Non-wovens
wet tissue perforating rewinder |
| ¡¡ |
| ¡¡ |
|
  |
| ¡¡ |
Brief introduction:
this machine is mainly used in processing: in the middle
of the volume shape is the extracted wet-wipes,
especially suitable for the no core volume shaped
products.
Production craft:
materials onto the machine¡úperforating¡úgathering the
volume¡ústopping machine by counting number¡úgetting
materials by man¡útake to the saw¡úproducts¡útransfer the
materials to the spraying machine.
Equipment characters:
We promoted the function of the machine according to
customers¡¯ advises, and now, our machine has these
characters:
1. Precisely perforate, reduce the error of leaning
degree.
2. Adjustable volume¡¯s tension degree which can
manufacture the highly tensioned products.
Equipment disposition:
1. Mitsubishi or Panasonic frequency changer.
2. Spiral perforating system, trimming system.
3. Pneumatically putting materials system.
4. Volume tensity vernier system.
5. 3450 type standard cutting machine and special plate
which is made by stainless still.
6. Automatically counting system.
7. The requests of surface process: parts that touched
to cloth use anti-rust materials. The body of the
machine use car paint.
Technical parameters:
Name: non-wovens wet tissue perforating rewinder
Model: YWJ-SZ-T1800
Product size:
height14.8-15.8¡Á60-180pieces/volume¡Á150-240mm/
pieces£¨adjustable£©
Perforating parameters: Spiral perforating, adjustable
angle.
Suitable materials: 25-160g/©O water-sting materials.
Breath: ¡Ü¦µ1200mm¡Ábreath¡Ü1800mm
Raw materials paper inside core diameter: ¦µ 76.2mm (=3")
Process ability: 150meters/min.
Total power: 380V ,50HZ ,3.7 kw
Weight: 1200 kg + 600kg
Machine size: main machine: L 3200¡ÁW 2200¡ÁH 1500mm
Auxiliary machine: L 2000¡ÁW 1500¡ÁH 1600mm
Delivery dimensions: L 2500¡Á W1900 ¡ÁH1900mm, L 2500¡Á
W1900 ¡ÁH1900mm
¡¡ |
|
2. Tube-shape
sealing machine |
|
|
|
 |
|
|
Brief introduction:
This machine is assisted equipment for tape-shape wet
wipes machine(non-woven perforating machine) which is
mainly used in adding liquild and sealing for rolled
tube-shape wipes.
Production Process:
Rolled non-woven wipes onto transport beltadding
liquild at a certain amountsealingpassingscrewing cap
by man power
Equipment disposition:
1. Membrane hot sealing cutting system,including
menbrane tension installment,covering menbrane
installment Detection of positioning sensors.
2. Heating / temperature control components, Sealing
device rack,holding-cup device,hot sealing board and
sealing head, membrane cutting device,hot sealing
cutting devices and plastic devices are used pneumatic
installment. The production process is hardly to have a
broken membrane.
3. Drive traction system and templates tension
installment,including Drive motor / deceleration /
transmission device composed of a step system in a
straight line, traction drive chain / guides, action
positioning devices, templates / bracket, the mold must
depth to ensure that the production requirements.
4. Electrical control system. Wiring reasonable norms
and beautiful.
5. Pneumatic system: triple by aerodynamic pieces,
electronically controlled valve, gas and road joints and
other components.
6. Rack and the main material: the equipment rack welded
carbon steel used by anti-rust paint processing,
outsourcing stainless steel plate. Liquild-adding
buckets and boards are made of stainless steel materials
with excellent preservation of corrosion.Seal-appearance
on the Teflon non-stick spray coating. The other
components of equipment is in line with the health
requirements of the materials.
7.The sealing Cutting device and the appearance shaping
device, from top to bottom in the height of 5 cm
(including 5 cm) of the adjustment can be arbitrary. To
ensure that a various production of Tube-shape sealing
machine.
Technical parameters:
Equipment name: Tube-shape sealing machine
Model: YWJ-SG-A
Tube volume: 50ml-400ml
Tube specifition: ¦µ60-150mm£¬height80-220mm£¨option£©
Processing ability: 1600 tubes/hour
Gas source pressure: ¡Ý 0.5Mpa
Compressed air consumption: ¡Ý 0.3M3/min
Total power: 380V£¬50HZ£¬2kw
Weight: 400 kg
Machine size: 2200¡Á600¡Á1800mm
Packing size: 2400¡Á800¡Á2000mm
¡¡ |
|
¡¡ |
|
Warmly welcome to visit our factory and test our
machines.
E-mail:
wet_tissue_machine@126.com
FAX: +86-518-85164005
TEL: +86-518-85968660
MOB: +86-15961396591
|
| ¡¡ |
|
